Perfect Union banner

1 - 5 of 5 Posts

·
Registered
Joined
·
262 Posts
Discussion Starter · #1 ·
Hi folks,its been a while. I decided to dust off the mini and i want to upgrade my optics. The gun is a ranch rifle,first three of the serial is 196. My question is if i can mount an ultradot 6 using my 30mm scope rings without the use of a rail? Thanks!
 

·
Registered
Joined
·
129 Posts
I mounted an Ultadot Four on my Mini-14 Tactical using 30mm Ruger factory rings with problems. Brass ejected freely and! I'm able to remove the bolt without removing the scope.

Sent from my DROID RAZR using Tapatalk 2
 

·
Registered
Joined
·
663 Posts
You might have some issues with that 196 since the older rugers eject out and up vs. to the side with the newer ones
 

·
Registered
Joined
·
262 Posts
Discussion Starter · #4 ·
Thanks for the responses guys. I have no issues with my current set up. Just looking to replace the old accudot and was wondering if the ring distance is compatiable with the ultradot 6 mounting surfaces. I'm now aware that ruger changed up the mini a while back. Where can I find out all the new mini info versus the old mini?
 
1 - 5 of 5 Posts
Top