I can now answer my own question. I bought a 36" x 13" NCStar case through amazon.com for about $15.
My 5846 (Mini-14 ATI side-folder) fits snugly inside with the adjustable stock in the shortest position. I can also get it inside in its folded configuration, but the case is REAL lumpy that way (about 5" thick at the butt), so I don't do it.
Mini-14/Mini-30 - Fixed Magazine Kit Device sold at lower price without currently unavailable trigger latch tool.
It was necessary to remove my aftermarket Coughlan Arsenal Ambi Mag Release and OEM mag latch spring. Probably possible to mod the Cogburn Arsenal item, but easier/quicker to...
I've been working on a custom butt plate for a while for a few of my Rugers like the mini 14 and 30, as well as the PCC 9 and ranch American. It's really handy because it slides on and off thanks to my modifications and you don't need to unscrew anything.
I want to know if any owners of the...
While cleaning and lubing I noted some peening on the bolt where it strikes the hammer. You can (hopefully) see where some material has rolled over a bit. Should I just stone it back a bit and perhaps polish the area, or is this cause to send it into Ruger.
It's a 582 series I bought in 2013...
It was way overdue for a complete revamp. Check out the new digs if you have a moment, and let me know what you think. It's still being tweaked, so you may notice some formatting issues.