Perfect Union banner
1 - 8 of 8 Posts

· Registered
Joined
·
27 Posts
No, but I got two new toys that I have been working on. One is a encore 22-250 and the other is a 30-30 carbine for contender. Have not got either one finished. Time and Space is the guilty party, but I am planning to remedy this condition hopefully this week end.

Good luck to you with the 223:
 

· Registered
Joined
·
29 Posts
:2guns: have i got a load for you! i shot a 3 shot group at 100 yards less than 1/2" (.450" to be exact). i got the load from a friend and he said it shot good in two other 14" .223's also. it's with BLUE DOT powder. it works great for p doggin, i hear. low barrel heat for lots of shooting. i like it because it is low in recoil and allows me to use a 4x12 rifle scope on my 14" .223 barrel. 13.5gr of blue dot w/40gr nosler balistic tip, cci-br-4 primer, win. brass. pressure builds rapidly, so work up in very small increments. it shows no pressure signs in my barrel but all are different. approximately 2900fps in friends barrels.
 

· Registered
Joined
·
179 Posts
Hey Steve,try this one it works great in my Super14 223----21.5gr IMR 4198,wsr primer,Hornady 40gr. V-max Vel=3150fps It's a smoker,so lower about 1 1/2 grs to start with,and work it up! I have consistantly taken crows,and varmits with this load out to 200yds. Good shooti'n Ron :lol:
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top