Perfect Union banner
1 - 1 of 1 Posts

· Registered
Joined
·
414 Posts
:ar15:
I'd just like to add two cent's worth. When you change stocks, make sure you tighten the rear screws real good! I went through several weeks of thinking hell about what was wrong with my RR. A friend suggested the metal was loose in the stock, and he was right. I thought the rear mounting screws were tight enough, but in my case, they need to be really tight! Also, about the front screws where the gas block bolts on, they don't need to be that tight. Don't go crazy there, you might strip out the aluminum threads.

Hope this helps.

Vote pro-gun. Vote for your civil rights. Get your shooting buddies to write their governor and legislators. If they won't take a stand now, they won't take a stand when it's really tough.

Kalifornia Citizen
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top