Perfect Union banner
1 - 7 of 7 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
I just picked up a Mini 14 Target. It has the Houge stock on it. It has the factory scope rings with it, but no scope. What do you guys recommend for a scope. I think I would like a silver colored one to match the rifle parts. I will get a bipod later. Does anyone make something that can use the hole in the gas block or an adapter that bolts on the gas block??
 

·
Registered
Joined
·
127 Posts
Nikon Buckmasters Rifle Scope 6-18x 40mm Side Focus Mil-Dot Reticle. Not sure if it comes in silver, but just about the best $300 high power 1" scope going. I have them on both my Target and my 6.5 Grendel conversion in factory rings and they work great.
 

·
Registered
Joined
·
10,469 Posts
Add a sling stud to the forearm about 2 1/2" from the gas block. This will be a better mount than the Harris gas block and more accurate for the rifle keeping pressure off the barrel. You can get any standard bipod to fit the sling stud. Easy to install with a T nut.
 

·
Registered
Joined
·
663 Posts
Add a sling stud to the forearm about 2 1/2" from the gas block. This will be a better mount than the Harris gas block and more accurate for the rifle keeping pressure off the barrel. You can get any standard bipod to fit the sling stud. Easy to install with a T nut.
Thats what I did. Used some epoxy on the threads and on the top of the bipod stud to make sure it would stay in there. Not gonna count on the threads holding in a plastic stock ;) Looks great when finished.

DSCN0029 by jpetrak, on Flickr
 

·
Registered
Joined
·
33 Posts
My bipod is mounted on a stud through the fore end of the stock. Works well and has yet to come loose. See Pics.
 

Attachments

1 - 7 of 7 Posts
Top