Perfect Union banner

Mini-14 Ranch Recoil Buffer

2384 Views 2 Replies 3 Participants Last post by  cajungeo
Hello to all in the Perfect Union Forum, especially to Ruger Mini 14 owners. This is my first thread or question I have. I have been reading through the Mini 14 area for a couple of months and have really enjoyed it. I do not own a Mini-14 yet. I am a newbie and will definitely be buying a Mini 14 very soon. I have decided on the .223 caliber, since there are more bullet options and brands compared to the 7.62x39. I won't be hunting anything larger than a coyote and I really like plinking. For my question though, my biggest question, and I've searched all through the forum and can't find a clear specific answer, only relative ones, is all about the Ranch Rifle Recoil Buffer. Since it is only a feature , buffer bushing?, on the Ranch Rifle and not on the standard Mini 14. I'm pretty sure that this means the Ranch Rifle has all around lower recoil and the standard Mini has more recoil. Right ? This is for protecting your scope. Right ? Well, just out of curiosity, can the buffer bushing and cross pin be removed on the Ranch Rifle and be used safely and accurately without it ?? Just so I can feel what the recoil on the standard Mini14 is like. I do want the option of putting a scope on my rifle, so I do want the Ranch version. I will put back the buffer bushing in later and keep it there. I just want to know if it can be removed, as an option. If I were to get the standard Mini 14, I'd probably get the scope mount from B-Square. But from reading the forum, it seems like it isn't reliable enough and that it comes loose and falls off. Well this is enough that I've asked so far. This forum and all the members seem really generous with their information on firearms. Great thing its free. Can't wait till I get that Mini.
1 - 1 of 3 Posts
Bill-I'm not sure how you could remove the buffer because it's also the seat that the recoil spring guide fits into. Dispite it's name I don't see how the buffer really absorbs recoil at all. All it is is a hollow steel cup with a pin going thru it's center for the spring guide to rest in. I think Ruger put it there to keep the operating rod from hammering derectly on the receiver. In that way the "Buffer" takes any damage instead of the receiver & can be replaced. If you're planning to use a scope I'd recommend the ranch rifle because of it's integeral mounts.

Hope this helps
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.