[rugg]

I've had a mini 30 for 5 years now,can anyone tell me how to tighten up the groups without breaking the bank,I don't know much about the mini 30's,but I do work on my own pistols.any advice would be welcomed:usa:

 

[cajungeo]

Welcome rugg, there is a lot of info on accurizing the mini in this forum. I would:
(1) Find the ammo YOUR mini likes
(2) Install muzzle brake 19.95
(3) Bed stock 14.95
(4) Trigger job (25.00 to 45.00)
(5) Install smaller gas bushing 25.00
(6) Scope it
Document your average group size before, and after. You will be pleased.

Then if you aren't grouping 1 1/2" to 2" at 100 yds. using a sand bag or bipod, work on your marksmenship, to catchup to your rifle.


Tip, use the search button in your upper control panel, type in key words, for example Muzzle Brake, all posts dealing with your key words will come up, with key words, in RED.

 

[rugg]

whats a good trigger to put in there,is there info anywhere to glass bed?thanks for your help.

 

[djskit]

The trigger work is with the existing group, no extra parts needed.

is there info anywhere to glass bed?thanks for your help.

I would advise using that little search button our Cajun moderator directed you too and type in "glass bed".