Perfect Union banner
1 - 3 of 3 Posts

·
Super Awesome Member
Joined
·
323 Posts
Not sure if there is a hogue specific kit, but you can do several things:

Buy a length of rail with a flat base and mount it directly to the stock or you can buy a rail with a canted base and shim one end to level it.
 

·
Registered
Joined
·
18 Posts
I put the AFG2 grip on my hogue using this:


You'll need to measure and drill the holes. Also, the hogue is pretty thick, especially at the receiver end. I had to dremel and thin out a lot of the inner part of the stock to allow the rail screws and nuts to meet. Took me about an hour or so.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top