Perfect Union banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
:usa:I just purchased a used 184 Mini 14 from a guy who said it jammed. Well, after a 4 hour cleaning session it no longer jams. The only problem now is that after a couple of rounds it has FTF issues. It extracts wonderfully but the feeding is a hit and miss at best. I was using a factory 5 round mag at the time. Any suggestions would be greatly appreciated. :USA:
 

·
Registered
Joined
·
36 Posts
Take it OUTSIDE , point it in a SAFE DIRECTION and place it on SAFE , then with a loaded mag work the bold back and forth " with force as recoil would " and carefully observe . is the magazine fully seated front and rear " no daylight around it " or is something preventing it ? I think you problem probably involves the mag. not lifting the rear of the round high enough for the bolt to catch it. also check the magazine spring is not broken or weak. try a new mag. hope this helps. Careful observation and using the experience of others will always save you time and money
 
1 - 3 of 3 Posts
Top