Perfect Union banner
1 - 2 of 2 Posts

·
Registered
Joined
·
9,765 Posts
Hey dvd, I had never seen a beding job before so I got the video from mike knifong @ NW Shooters Support on glass beding the mini, for $15 encluding shipping. It is no hollywood production, and needs some editing, but it is very thorough, and Mike does a good job keeping the camera in there so you can watch him bed a mini. Basicly you releive any thing that would tweek the barrel, and bed the stock reinforcement MS00700, and receiver to the stock, LEAVE OUT the forearm liner as you want to bed the action especially around the recoil lugs, with out any preload. I used the Acraglas kit. It came with brown or black dye, release agent, and instructions. It has everything you need except playdough. I used mylar tape instead. Don't forget to apply the release agent to the stock reinforcement, trigger group, and action! Good luck.
P.S. the playdough or mylar is to seal off anything that would allow the epoxy to form a mechanical lock, which would forever bond your stock reinforcement, and action to the stock.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top