Perfect Union banner

Fitting an old factory stock to a new 583 mini.

1800 Views 1 Reply 2 Participants Last post by  RJF
I thought this would be a drop in affair but it isn't. I had to open up the sides of the stock to get the new action in and now the action wont pull down flush in the rear. There is a noticeable gap between the receiver and the top rear of the stock. Anyone have experience with this? Thanks Dave
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.