Joined
·
10 Posts
Hi all:
I have a Colt Python Cylinder & Side Plate Gun Parts Item #1987720852 listed on Ebay with photos (I also listed the barrel in a separate auction) See the description or put the link below in your browser. Auction ends 1/14/02, so HURRY!:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...item=1987720852
Colt Python Cylinder & Side Plate, with cylinder crane and ejector rod. Original Nickel plating, in very good condition. There is almost no turn ring (or drag line) from the cylinder stop; see photos (Click on Supersize for detail!). Gun was probably almost never shot. It does have several tiny dings on one small area of the cylinder, but are not deep and not
prominent and can likely be polished out (See close-up photo). The ejector rod is slightly bent, almost unnoticeable, but still works and can probably be made straight again. The side-plate is nice too; the horse is stamped well and very clear. There are minor surface scratches on the side-plate that can also likely be polished out; these are so small, they don't show up in the photos. I'm probably making these sound worse than they are, however, as a buyer I don't like surprises either. Descriptions like "Nice" just don't cut it for me. See my other auction for a RARE 4" Nickel barrel; (Colt Python Barrel 4" Nickel Gun Parts .357 Item #1987719497). Buy both and save on shipping!
GOOD LUCK!!!!!!!!!!!!!!!
I have a Colt Python Cylinder & Side Plate Gun Parts Item #1987720852 listed on Ebay with photos (I also listed the barrel in a separate auction) See the description or put the link below in your browser. Auction ends 1/14/02, so HURRY!:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...item=1987720852
Colt Python Cylinder & Side Plate, with cylinder crane and ejector rod. Original Nickel plating, in very good condition. There is almost no turn ring (or drag line) from the cylinder stop; see photos (Click on Supersize for detail!). Gun was probably almost never shot. It does have several tiny dings on one small area of the cylinder, but are not deep and not
prominent and can likely be polished out (See close-up photo). The ejector rod is slightly bent, almost unnoticeable, but still works and can probably be made straight again. The side-plate is nice too; the horse is stamped well and very clear. There are minor surface scratches on the side-plate that can also likely be polished out; these are so small, they don't show up in the photos. I'm probably making these sound worse than they are, however, as a buyer I don't like surprises either. Descriptions like "Nice" just don't cut it for me. See my other auction for a RARE 4" Nickel barrel; (Colt Python Barrel 4" Nickel Gun Parts .357 Item #1987719497). Buy both and save on shipping!
GOOD LUCK!!!!!!!!!!!!!!!
