Perfect Union banner
1 - 5 of 5 Posts

716 Posts
Discussion Starter · #1 ·
Someone asked me a while back to post a pic of the brass catcher. This is a must-have if you don't want to spend half your time at the range looking for your 60-foot flung brass. Also increases your chances of keeping friends at the range.

This is how the gun looks without the catcher on. Takes 30 seconds to remove the standard reinforcement screw and replace it with the provided allen screw and washer. I just leave the screw and washer in even without the brass catcher as they don't get in the way.

Here is the side of the brass catcher that mates with the gun:

Here it is installed:

And one more view:

It looks a little clunky, but it really isn't. Once you get situated, you hardly notice it's there. I have never actually filled it all the way with shells, but it easily holds 50 spent cartridges. Probably a lot more. I usually empty it after every 30 round clip.

You can get one at or
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.