Perfect Union banner

after stock bedding, reciever is unremovable

1189 Views 5 Replies 4 Participants Last post by  James Pruden
i was curious: if i bed my stock, will the parts that have been bedded into the stock be unremovable? will i be stuck with that stock forever?
1 - 2 of 6 Posts
natedog---If done correctly using release agent on the parts you don't want glued to the stock the end result will be a tight fit that can be removed from the stock. Mike Knifong sells a VHS tape that shows exactly how to bed your Mini. Do a search & contact him.

Good luck
You are just starting out & have a lot of questions that need to be answered & you have come to the right place. There is a lot of good information here as well as a lot of opinions. There are over 1100 threads here covering every facet of the Mini-14/30.

Good shooting
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.