[natedog375]

i was curious: if i bed my stock, will the parts that have been bedded into the stock be unremovable? will i be stuck with that stock forever?

 

[bushwack]

natedog---If done correctly using release agent on the parts you don't want glued to the stock the end result will be a tight fit that can be removed from the stock. Mike Knifong sells a VHS tape that shows exactly how to bed your Mini. Do a search & contact him.

Good luck
Bushwack

 

[natedog375]

thanks bushwack, youve been a really big help to me

 

[bushwack]

You are just starting out & have a lot of questions that need to be answered & you have come to the right place. There is a lot of good information here as well as a lot of opinions. There are over 1100 threads here covering every facet of the Mini-14/30.

Good shooting
Bushwack

 

[cajungeo]

if i bed my stock, will the parts that have been bedded into the stock be unremovable? will i be stuck with that stock forever?

No if done properly. Yes if ya don't block all possible mechanical locks, with modeling clay, or mylar packing tape, and forget the release agent. IF done properly, that stock will fit that action perfectly. It probably won't fit a diferent action till you remove the beding.

Also if you want more info on this or any subject, you can use the handy search button in the upper right control panel, and enter key words. All related posts will come up with your key words in RED

 

[James Pruden]

I recently beded my Mini 14 and posted before and after pictures here on the Perfect Union.

Check out this thread.

http://www.perfectunion.com/forums/showthr...=&threadid=2666