Perfect Union banner

mini-14 aftermarket parts

  1. Ruger Mini-14 and Mini-30
    Finally got a bipod put on my mini 14 stock I set it back a little bit to get more meat for the swivel stud to bite into because the stock tapers down on the inside. I took my time with it and drilled it perfectly so the swivel stud would not bust through the other side and contact the...
  2. Ruger Mini-14 and Mini-30
    Folks, fairly new to this forum and first thread I've started. I have a 181-series Mini-14GB model, blued, and all-original except for the stock. Short of bedding the stock (I have two - an ATI Strikeforce and the Choate folder that came with it when I bought it used in 1980), I am looking for...
  3. Ruger Mini-14 and Mini-30
    I recently changed my 580 series synthetic stock Mini 14 out to a Butler Creek Folding stock. The installation went fine --tight fit and smooth no hitch firing. My BCF stock has two screw mounting holes (one on each side) and I fully expected that I was going to have to order a stock...
  4. Ruger Mini-14 and Mini-30
    Are M1 rear sights a good replacement for Ranch rifles?
  5. Ruger Mini-14 and Mini-30
    Hi there, I am new to this forum and have been looking around the site for info on muzzle brakes that are effective and and doesnt increase muzzle blast that much. I have a new 581 series 6.8 spc mini 14 ranch rifle and would like to make it my main hunting rifle. I am looking for a good...
  6. Want to Buy
    Looking for a genuine B-Square mount for a 184 series Mini 14. Seems to be a lot of folks that tried them but didn't like them, make me a deal...
  7. Ruger Mini-14 and Mini-30
    Hello all, I have it on good authority that the -14 action will fit quite nicely in a Clyde's Mini-30 SCAR stock and that the only difference between the two models is the mag well is larger on the -30 stock. The magazine guide built into the trigger section of the -14 would resolve this extra...
  8. Ruger Mini-14 and Mini-30
    Hello everyone, Thought I'd throw it out to see if anyone is thinking about it. I'm looking for a SCAR stock for my 580 mini-14. Scratches and dings OK. Willing to pay retail price plus shipping and I have a mint condition wood stock and hand guard to convert it back to a ranch rifle to sweeten...
  9. Ruger Mini-14 and Mini-30
    Rather than fighting for and losing out,on mods to the mini Has any one bought and used one of these? I attest,I have been mini poor and spent way to much, I bet I have 50 magazines for them,and at one time owned seven,3 ,30s and 4,.223z This rifle here is less than I have in my asi mini...
  10. Ruger Mini-14 and Mini-30
    Has any one put something like this on, What rings did you use? How did you resolve the turkey necking to get a good cheek weld? Unable to post pic of this ,but I think there are a bunch that know of this situation.. Thx
  11. Ruger Mini-14 and Mini-30
    i did a little research on the wilson 1911 recoil buffer. it seems to work pretty well with a mini 14 for most people. does it make any difference in how far the brass is ejected after installing the buffer? i reload and like to recover as much brass as can. thanks.
  12. Ruger Mini-14 and Mini-30
    Has anybody installed one of these on the Mini-14 yet... Pics? Choate M14 Look-a-Like- Blue For The Mini-14 Choate Recoil Compensator for Mini-14 made of solid steel, bath blued or S.S. Both models sight looks like the original M-14 Sight. The compensator is permanently attached to the gun...
  13. Ruger Mini-14 and Mini-30
    Hi there. Does anyone know how one might remove the folding stock and its locking assembly? I also can't get the bolt/screw out that holds the pistol grip on, although the pistol grip did come off. It's a pretty unusual stock and forcing things didn't seem like a good idea. It needs...
  14. Ruger Mini-14 and Mini-30
    Looks like a nifty system for adding different AR muzzle brakes and front sights to your Mini with the plain vanilla pinned front sight. Dress Up Your Mini 14 - Mounting Solutions Plus
  15. Ruger Mini-14 and Mini-30
    Doe's anyone know were i can get tapco gen II mini 14 mags I cant see to find them on the internet Thanks Dan
  16. Ruger Mini-14 and Mini-30
    What do y'all think about 'em? I've always liked their products, but haven't had any experience with their stocks. I like the way they look and would like to get one for my mini if the experiences are fairly good. Just wondering if you liked 'em or not, and if you didn't, why not?
  17. Ruger Mini-14 and Mini-30
    Hey guys...newby here. I've just bought a new (to me) Mini-14. Judging from the front sight (M1 Carbine type) it's a 580 or 581 series. I understand these rifles have reputation for inaccuracy. Be that as it may, I plan to mount a scope and try a few handloads to see how she does. BUT, as I...
  18. Ruger Mini-14 and Mini-30
    Hello there... Ive had my mini14 for quite some time, but have not found time to play with it... Ive only shot 50 rounds through it during last year.. and thats all she has shot.... But sadly, we had a madman running around doing great damage here in Norway, so im not planning to take the rifle...
  19. Ruger Mini-14 and Mini-30
    hey just got my rear sight in but lost the screw that holds the sight. just wondering if im able to find this in home depot or lowes and can anyone take a guess what size screw i would have to look for? thanks in advance!
  20. Ruger Mini-14 and Mini-30
    Hey guys, Its been a while since I've been on this forum. I thought there was a thread about how to shorten the hogue stock for the mini-14. I could not seem to find it. Is this doable? Is it a pain? Does anyone happen to have a link to that thread if it exists? I'm trying to decrease the...
Top