Perfect Union banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 55 Results
  1. Ruger Mini-14 and Mini-30
    My question concerns the elevation range on the Techsight. I have a 584 series Mini 14 fitted with the Techsight. Originally I bought it, along with the larger aperture and the push in reduced apertures. My problem is with how low the rear sight needs to be set to zero the elevation. The reduced...
  2. Ruger Mini-14 and Mini-30
    I recently purchased a Ruger Mini 14 tactical model that comes with a picatinny rail down the barrel. I've mounted a red dot sight on it; however, there is no co-witness as the iron sights are so low that anything mounted on the rail interferes. I've seen a lot online about offsetting red dots...
  3. Ruger Mini-14 and Mini-30
    I've noticed that ASI sells factory new mini 14/30 barrels for between $99-$149. It mentioned that it would need to be headspaced and indexed. I was wondering if it was possible for someone who is not a gun-smith to be able to install the barrel themselves. Would a barrel vice, head space...
  4. Ruger Mini-14 and Mini-30
    I love the Mini 14 and have a 196 series, I like using 10 round mags, anyone have any favorite brands and sites to get them at?
  5. Ruger Mini-14 and Mini-30
    OK, first Mini 30 on order, due in about a week. I could only get it with a polymer stock, so I picked up a used wood stock and I am refinishing it. Question: The wood stock has bolt holes on either side of the magazine and the polymer stock does not. What are the holes for? Are they special...
  6. Ruger Mini-14 and Mini-30
    Hello to all, I just ordered the above and should have it early next week. I looked through the archives and got some help but still have questions. I am new to this forum and new to the Mini 14 (Trained on M14 (OMG that was 50 years ago:( ) and excited about playing with the 300 Black...
  7. Want to Buy
    Hello. I'm looking to purchase an Accu-Strut for my 14. Particularly looking for the regular one that is blued. Thanks in advance
  8. Ruger Mini-14 and Mini-30
    I have an unspent round stuck in my mini 14. The action closed all but a quarter of an inch and won't move in or out. How can I get the action to move? Thanks
  9. Ruger Mini-14 and Mini-30
    Newby here. I have read a lot about changing the gas bushing, but it is not clear to me what's the benefit. Would someone enlighten me? Many thanks. R/Chris Woods
  10. Ruger Mini-14 and Mini-30
    Ok….so I have been running this through my head for a while because I enjoy the Mini so much BUT in factory form it really has some drawbacks. I am also not completely happy with the current aftermarket options even when you use a stock like I currently own which is the Archangel Sparta(which I...
  11. Ruger Mini-14 and Mini-30
    Crooked/canted/tilted Gas Block Hey Mini-Lovers... I recently picked up my new 582 series Mini Thirty a few weeks ago. Been to the range twice and I am loving it!! Problem... After cleaning her the first time, I lined up a small Magpul Pic rail on the bottom of my stock and I realized...
  12. New member introduction
    Hey everyone!! New member to the forums here. Been browsing for a little while now and thought I'd register and join in on all the shenanigans. Also recently got my first rifle. Ruger Mini Thirty Ranch 7.62x39. :D Took it out for the first time yesterday and LOVED IT!! Shot really well I...
  13. Ruger Mini-14 and Mini-30
    So I just got a my Mini 14 and I have been cleaning, shooting, and affectionately touching it for about a week now. Everything functions fine but there are a few little oddities that I would like to compare with you. 1) My slide/bolt combo feel reluctant. Especially as I move the slide closer...
  14. Ruger Mini-14 and Mini-30
    Ok, I know what you're thinking. "Not another 5.56/.223 thread." You're in luck! This isn't that thread. I just picked up my new Mini 14 yesterday and noticed that the receiver is stamped "5.56 NATO." Is that usual? Everywhere I look I hear people's are stamped "cal .223"
  15. Mini-14 Mini-30 Gallery
    I just picked up my new Mini 14 and noticed that the receiver was stamped 5.56 NATO. Is that usual? It seems like everywhere I look, everyone's is stamped .223.
  16. Ruger Mini-14 and Mini-30
    Hey guys, I plan to thread my Mini 14 (580 series) barrel and add a muzzle device to it. My questions are: 1)Where would you get a barrel threaded at? Would you just look around locally or ship it somewhere? 2) What device would you suggest? 3) About how much would this cost? I'm wanting to...
  17. New member introduction
    Very good to see a site not devoted to one rifle :) since im new i have a question: say i wanted to buy a used Amega Ranges mount for a 580 series Mini 14 "which i do " where would i post this?
  18. Ruger Mini-14 and Mini-30
    hey guys I am looking into getting a trigger job on my mini 14 and 30....does anyone know the best route to go? I am fine with sending off my trigger group but just don't know which company to trust...any feed back and personal experiences will be greatly appreciated
  19. Ruger Mini-14 and Mini-30
    I recently aquired a 180 series mini 14 rifle, took it out to shoot it and it was having cycling problems, so i did some reading and found out the gas block is supposed to have a tiny bushing in it, took mine apart and the bushing was missing. I am not sure if any mini 14 bushing will fit it or...
  20. For Sale - Complete Firearms
    SOLD PENDING FUNDS Hi, I have a Mini-14 195 series stainless steel ranch rifle with factory 5 round and 20 round mags. I also have a 1 x 20, 2 x 30 and 1 x 40 aftermarket mags. Currently I have a Butler Creek folding stock on the gun, which I will sell as an option (+$75) otherwise it will come...
1-20 of 55 Results