PDA

View Full Version : CZ452 17HMR Microfit stock

crieffy
05-14-2006, 09:45
Here's my CZ452 Varmint 17HMR fitted with a Richards Microfit Tac-Driver stock. Other details are: Bushnell Elite 10x40 scope, BKL rings, Eric Brooks trigger kit and hex head action screws, flush-fit magazine mod (still holds 5 rounds), Harris swivel bipod, and an ASE Ultra silencer.
http://www2.propichosting.com/Images/132157/36.jpg

Edit: here's a kinda step-by-step album (http://www.propichosting.com/Album.aspx?folder=450013033) of the stock being worked on
ShootinDave
05-14-2006, 10:33
VERY VERY sexy weapon there crieffy. I'll bet she is good at wackin those pesky UK rabbits I hear about.

- Dave
crieffy
05-14-2006, 11:35
VERY VERY sexy weapon there crieffy. I'll bet she is good at wackin those pesky UK rabbits I hear about.

- Dave

Thanks, Dave

Yup - it's very good on rabbits. We have a thing going locally at the moment where we get approx 40cents per rabbit shot. Unfortunately 17HMR ammo is about the same price!:rolleyes:
Sniper
05-14-2006, 16:45
That is PRETTY!!!! Thanks for the info on shortening the mag to fit flush and still hold 5 rounds. I've looked at Richards stocks. Did you have to do any inletting of the stock or did it drop-in?
:sniper:
crieffy
05-15-2006, 02:55
That is PRETTY!!!! Thanks for the info on shortening the mag to fit flush and still hold 5 rounds. I've looked at Richards stocks. Did you have to do any inletting of the stock or did it drop-in?
:sniper:

Thanks, Sniper

I did a photo album as I worked on the stock > http://www.propichosting.com/Album.aspx?folder=450013033
There was a little bit of inletting to do at the front of the receiver and in the mag well, but overall it was a very good fit. I think for the price you get a very good stock. Some folk complain they come with too much extra wood and sanding to be done - but this must be better than not having enough wood:D

Cheers,
John