Cricket
01-30-2005, 15:03
I have just came into owning a Win '94 in .32 Win Spl, this weapon was made in 1964, it is considered as being of the Pre 64 vintage, has the half cock for a safety and no other safety improvements added. From the appearance of this rifle it has been used very little, there is some bluing on the loading gate side of the receiver that is just starting to show wear which appears to be caused by carrying the rifle, it has turned kind of a rust color but there is no rust. Inside the loading compartment there is very little signs of wear on the bolt slides, they are still in their blued configuration, as is the cartridge carrier itself, so I feel that very few rounds have been through this '94.
The problem I'm having is: It is impossible to cycle the rifle in any manner (fast or slow) since the cartridge carrier, from the magazine to the breech, seems to be rising at the front to far which will jam the nose of the cartridge into the upper portion of the breech preventing the round from completely entering it. If I backoff on the loading lever and jiggle it somewhat the carrier seems to drop down enough, levels itself out, for the cartridge to be loaded. It makes no difference if it's the first round or any others, the problem just repeats itself each time the lever is cycled. Any ideas or solutions to a fix would be very welcome and appreciated. My Thanks in advance to any who reply to this post. :(
The problem I'm having is: It is impossible to cycle the rifle in any manner (fast or slow) since the cartridge carrier, from the magazine to the breech, seems to be rising at the front to far which will jam the nose of the cartridge into the upper portion of the breech preventing the round from completely entering it. If I backoff on the loading lever and jiggle it somewhat the carrier seems to drop down enough, levels itself out, for the cartridge to be loaded. It makes no difference if it's the first round or any others, the problem just repeats itself each time the lever is cycled. Any ideas or solutions to a fix would be very welcome and appreciated. My Thanks in advance to any who reply to this post. :(