Pdaddy
08-21-2004, 13:29
Wohoooo !!!
U guys maybe know about my old project (barrel harmonizer, alu stock) and that one of them is working at this date. The Alu stock has been put to the side for a good ollll nap, but NOW !!! it's time for new stuff.
When i started making the alu stock etc, i made a totaly new Gas-block. The gasblock had more mass then stock and an inbuilt shock absorber, it have thought not been shot much after all this, and it's going to be tried out next saturday @ 100 yards/meters. I have just shot 50 Meters with the gasblock and standard stock (houge). One big diffrence without stock gas-block is that mine doesnt attatche it self to the stock, so it's more or like free floating (could be both good and bad). In a slow fire situation (target shooting) it's good me thinks, cuase it's no strange tension stress apon the block/barrel from the stock or reciever fitted badly att reassembly.
I got the barrel harmonizer on offcourse.
But now i want to test another ide, that i know other people have tried with diffrent results.
I want to make a barrel stabelizer/stiffner, that requires a new high tech gas-block *haha* and a metal/alu tube + adapter for barrel tip/tube.
The tube will be fastned in the gasblock, just the way you clamp the barrel (see drawing).
Then i will make a barrel adapter, that will fit the barrel tip with a force on fit if u know what i meen. That adapter will be pounded into the tube so it's safe in place and cant move.
The hole thing goes on the barrel, then you attatche the new gasblock and woalla u got a barrel stiffner aka 1 inch bull barrel look alike ;)
1. Gasblock, super beeefed and with shock absorber like the old one
2. Tube, made of Alu or steel, maybe went holes to.
3. Barrel adapter thingy
What you guys think of my plan.. ??
Over and out from the Swedish Dude
Marcus
U guys maybe know about my old project (barrel harmonizer, alu stock) and that one of them is working at this date. The Alu stock has been put to the side for a good ollll nap, but NOW !!! it's time for new stuff.
When i started making the alu stock etc, i made a totaly new Gas-block. The gasblock had more mass then stock and an inbuilt shock absorber, it have thought not been shot much after all this, and it's going to be tried out next saturday @ 100 yards/meters. I have just shot 50 Meters with the gasblock and standard stock (houge). One big diffrence without stock gas-block is that mine doesnt attatche it self to the stock, so it's more or like free floating (could be both good and bad). In a slow fire situation (target shooting) it's good me thinks, cuase it's no strange tension stress apon the block/barrel from the stock or reciever fitted badly att reassembly.
I got the barrel harmonizer on offcourse.
But now i want to test another ide, that i know other people have tried with diffrent results.
I want to make a barrel stabelizer/stiffner, that requires a new high tech gas-block *haha* and a metal/alu tube + adapter for barrel tip/tube.
The tube will be fastned in the gasblock, just the way you clamp the barrel (see drawing).
Then i will make a barrel adapter, that will fit the barrel tip with a force on fit if u know what i meen. That adapter will be pounded into the tube so it's safe in place and cant move.
The hole thing goes on the barrel, then you attatche the new gasblock and woalla u got a barrel stiffner aka 1 inch bull barrel look alike ;)
1. Gasblock, super beeefed and with shock absorber like the old one
2. Tube, made of Alu or steel, maybe went holes to.
3. Barrel adapter thingy
What you guys think of my plan.. ??
Over and out from the Swedish Dude
Marcus