Our Test 10/22

[ruger22com]

:sniper: Howdy from Mobile Alabama!!!
************************************************** ******************Here is a pic from the range last week of one of our test rifles. It is a Ruger 10/22 with:
muzzle brake/flash sup
dranunov stock
4-16 x 50mm barska scope
Steel bipod mount
some eagle 10 round clips attached togather
auto bolt release with a slight stone mod
soft bolt pin mod
hammer/spring and shims mod (reduced trigger pull from 7 to 2.4 lbs.
after market extractor & spring mod
..still needs a little work to reduce pre-pull play and a new trigger with a stop screw, but works really great now!
..Bob
http://ruger22.com/art/myrugr.jpg

[cajungeo]

Welcome to the forum Bob. Nice dranunov.So have you had a chance to see how it shoots yet? You can enter our on line challenge shooting contest. Currently its shooters choice. habanero has a challenge posted.

BTW ******************** ;)

[ruger22com]

http://ruger22.com/cuda5.gif

Finally got it done (except for tuner)

Barracuda Stock - fiberglass bedding
Yellow Jacket Hex Head takedown bolt in Stainless plus spacers to protect stock
Greenmountain .920 fluted stainless barrel
NcStar 6x24x50 illuminated scope with NcStar flip lenscaps
NcStar Silver Weaver style scope mounts
Burris Silver Signature scope rings with adjustable inserts
Power Custom matched Hammer & Sear
Sear modified by me with a set screw to remove trigger creep and stoned on bottom for smoth action with safety.
Yellow Jacket Silver Sport adjustable Trigger
Yellow Jacket Automatic Bolt Release Plate
Yellow Jacker Bolt Buffer in "natural color" to match aluminum receiver
Trigger housing stripped and painted "metal" silver
Yellow Jacket Extended Magazine Release
Yellow Jacket extra power Hammer Spring
Yellow Jacket Tuned Extractor & Spring/plunger
Yellow jacket tool steel firing pin
Trigger return spring cut down by 3 loops to reduce pressure on trigger back.
Wolff Springs for other trigger parts
Ruger 10/22 receiver with paint stripped and polished
Bolt radiused at back& turned for proper head space and rear pin movement, plus drilled & pinned to prevent firing pin jump.
Magazine spring tightened
Bolt handle painted "aluminum" color
Power Custom big head safety

Barrel end is turned down to .75 to mount a tuner (still working on design)

If you are curious, it is mounted on a repainted "outer's " varmintor system I have modified with a back clamp with sheepskin cover, and a front shooting bag mounted on a sheet of fiberpglass on a steel mounting rod.

This gun not only looks great, but is a tack driver with 3/4 to 1 inch groups at 100 yards shooting CCI green and winchester dynapoints. (I'm curious to see what the tuner drops that to!)

[cajungeo]

The barrel is definately free floated. The Green Mountain barrels shoot very well for the money.

BTW I merged your 2 threads as in the gallery we are limited to 1 per member.

[Bo Duke #2]

that sure is a perty stock it goes good with that SS 10/22