Done

[Gunter]

http://invis.free.anonymizer.com/http://gunter.freewebspace.com/images/gun_003.jpg

My 10/22’s:

Top is a 1978 model with:
GM 20” barrel
PC scope base
Bushnell Banner 6-18X50 scope
Leopuld med rings
PC hammer, sear, and shims
Clark trigger w/overtravel screw
Brownells barrel block for 2nd take-down screw
My own extended mag release
Glassed stock
Clickster return spring

Still have to send the bolt to CPC

Bottom is a 1979 model with:
TO-9 scope base
Simmons 3-9 22 Mag scope w/rings
My own trigger job
Clickster return spring
Glassed stock
Extended mag release

[cajungeo]

Thats a nice pair of 10/22's. Your target rifle, did you rework the std 10/22 stock to accept the .920" dia barrel?

[Gunter]

Yep, cut the factory walnut stock off at the barrel band and opened the channel with sandpaper around a socket. Then touched up with Tru-oil and later glassed with the gel.