I recently purchased a S&W Mod 24 Classic and I am looking for an opinion for a comfortable load for poking holes in paper and beer cans. Your 200 gr lswc with 9 gr of AA #5 sounds pretty much like what I'm looking for. A shooter friend of mine suggested that while I am waiting for an order of 200gr lswc to get here I might try 200 gr HP/XTP from Hornady with 5.8 gr of Unique and CCI LP primers. Have you ever tried anything like this? Also another question. I purchased 100 Winchester 44 Smith and Wesson shell cases. About 90 of these cases slipped into my Lee Auto Prime with #11 case holder with no problems. 10 would no go in at all. I measured everything and the only thing I could find that was slightly over spec was the thickness of the rim. I was curious if you or any of the other folks reading this might have had a similar experience and if so did you find a resolution to the problem? Thanks