Originally Posted by burkey1000

Ok Lets try this one more time. My post is very plain and simple.
THIS IS EXACTLY WHAT I SAID IN THE POST ABOVE.
"First the correct headspace to aim for is .0425"

I THEN WROTE EXACTLY THIS
" NEVER should this be said without also highlighting the importance of the firing pin protrusion which the correct measurment should be .035"

So how does you reply fit in what i wrote. John im not looking to put anyone down, do not twist my words around. Where the heck do you get that i mention headspace. IF YOU ARE REDUCING HEADSPACE WOULD YOU NOT MEASURE IT, WOULD YOU JUST GRIND IT AND HOPE FOR THE BEST. THATS WHY I GIVE THE 0.0425.

Im sorry John i dont come on here to play games with people but im afraid you realy are not making any sense at all.

Of course your firing pin was ok when you got it back from Que he checks and adjusts it as needed to the correct protrusion.

Im sure you will post something after this to get the last word and try and twist what i have just said AGAIN.

OH THEN AGAIN YOU COULD JUST DELETE THE WHOLE THREAD.